Crystal Clear is a solution of polymers that provide superior preservation of thread color during all stages of the rod building process. The polymers, when dry, are flexible and durable with excellent adhesion to the rod surface. Once dry Crystal clear is impervious to water.
Apply two coats of this product full strength to thread wraps. Allow each coat to dry thoroughly. When first applied there will be a significant darkening of the thread, particularly when applied to Silk or Madeira thread. This is normal. Simply allow each coat to dry thoroughly before proceeding to the next step. If you are applying this product to silk then it is recommended that three coats be used.
It is recommended that this product be used full strength. If you wish to dilute this product use acetone. However, this increases the number of coats needed to achieve full protection. 50% dilutions will double the number of coats necessary to assure adequate protection.
Do not speed up the drying process with a heat gun or hair dryer. This can cause the polymers to change into a glass-like form that can affect the color of the thread. It is also likely to blow dust onto your art work, and hence should be avoided. If you wish to speed up the drying process then simply keep the workspace warm and dry or in the alternative place the section of rod into a heated drying box.
Do not apply Crystal Clear so heavily that it puddles. If that occurs then use your brush to wick the excess material from the thread. If bubbles form during application then dip the brush that is filled with CP in acetone or denatured alcohol, and lightly touch any bubbles. This breaks the surface tension and allows any such bubbles to pop.
Clean the brush with Cason’s Brush Cleaner or Acetone. Wash the brush with soapy water after cleaning with the solvent.
Tight wraps!
