Mud Hole Sanded Graphite Rod Blanks

These blanks are taken to the next step in the manufacturing process from our Mud Hole Unsanded Rod Blanks. Our sanded rod blanks have had the cellophane removed and the rod surface smoothed out by sanding the entire rod during the manufacturing process. These blanks have a matte finish to them. You can build using the rod "as-is" for a matte finished rod or coat the whole rod with an epoxy rod finish. The finish on these rods is similar to a G-Loomis GLX or IMX blank. These blanks are matte charcoal gray in color.

Mud Hole Unsanded Graphite Rod Blanks

These are rod blanks in the last stage of production. The blanks have the shrink wrap cello tape still on the blanks. The cello type material can be easily be removed by just pealing it off. After you remove the cello tape, you can use the blank to build your rod. Once removed, the rod blanks will have a nice shiny finish with small ridges made from the resin squeezing out around the cello type. These blanks are charcoal gray in color. This pricing is for a very short time as an introductory special.