KNOTTY
CORK(tm)
& RUBBERIZED CORK FLY ROD HANDLESWe think you will agree with what our customers are saying:
Just got a knotty cork grip from Mud Hole. It's really, really, really, nice lookin' stuff. - Jeff V.
BOTH KNOTTY CORK & RUBBERIZED
CORK,
FULL WELLS ON TOP, HALF WELLS ON BOTTOM.
CLOSE UP OF RUBBERIZED CORK
CLOSE UP OF KNOTTY CORK
RUBBERIZED CORK FLY ROD GRIPS
A Mud Hole exclusive product. All grips are 7 1/2" long with 1/4" ID.
Video Demonstration
See how to make your handles really shine. Watch as we show you the secrets
of making Burl Cork and Knotty Cork handle come to life. You must have
Windows Streaming Media installed on your computer to view these videos.
All files are about 1.5MB, we recommend a DSL or faster connection.
WINDOWS STREAMING MEDIA FORMAT
HOW TO MAKE CORK HANDLES
SHINE!
The following step-by-step instructions walk you though the process of
bringing a high luster to you cork handles. This process works very well
on Burl Cork and Knotty Cork handles but may be used on regular cork handles
as well. When you are finished, you will have a cork handle that has a
high luster finish like a fine piece of wood furniture.
Step 1 - Sand the handle with 600 grit sand paper. Click here to see the video.
Step 2 - Tack off the sanding dust, then coat with U40 Cork Seal and let dry 10 to 20 minutes until the cork seal soaks in. Click here to see the video.
Step 3 - Repeat step 2 by applying a second coat of U40 Cork Seal. This second coat will take 24 hours to dry. Click here to see the video.
Step 4 - Burnish the handle at high RPM's with a cotton cloth. You really need to generate some heat here to cause the U40 Cork Seal to come to a beautiful luster. Click here to see the Video.