Tsuka 2 Carbon Handle for Casting Rods
Specifications
About American Tackle Co.
Tsuka 2 Carbon Handle for Casting Rods
Product Details
The Tsuka 2 delivers a range of cutting-edge features. Leading the way in blow-molded construction with the option of matte 3K carbon or forged carbon, American Tackle has solidified itself as a pioneer in handle design. Notably, the Tsuka 2 delivers the industry's first complete forged carbon handle system, revolutionizing the fishing rod landscape which earned American Tackle the Best in Show at ICAST 2023.
Versatility is a key attribute, as the Tsuka 2 Handle can be seamlessly integrated for a new custom build or retro-fitted onto completed rods. Its slim and ergonomic designs prioritize comfort and control, ensuring an optimal fishing experience. The handle's lightweight nature not only enhances maneuverability but also contributes to an overall reduction in the rod's weight without compromising strength. This blow-molded carbon process gives the most dedicated angler added durability to withstand the rigors tournament angling and elevates their ability to detect even the lightest of bites.
- Blow-molded carbon fiber construction: Experience unparalleled durability and performance
- Available in forged or 3K weave carbon fiber materialfor casting configurations
- Molded rubber end cap: Added protection for your investment
- Extreme strength-to-weight ratio: A mere 1.875 oz. single-piece construction that doesn't compromise on toughness
- Ergonomic trigger handle: Enhance comfort and control during extended fishing sessions
- Carbon fiber foregrip with aluminum trim: A sleek, functional, and stylish design to elevate your angling experience
- Comes with fitted neoprene sleeve
- Special Note: Tsuka 2 Casting Handles have an internal inner diameter clearance of 0.450" - if your rod blank has a butt outer diameter clearance of 0.450" or less, the blank will pass completely through the handle. This will allow you to utilize the entirety of the blank.
| PRODUCT | PRODUCT DIMENSIONS | WEIGHT (oz) | BUTTCAP DIAMETER |
| TSUKA2C-MFC | 14.875 x 1.04 x 1.72" | 1.875 | 1.035" |
| TSUKA2C-M3K | 14.875 x 1.04 x 1.72" | 1.875 | 1.035" |
Proprietary Construction
Extreme Strength / Weight
Ergonomic Design
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
Customer Reviews
The Tsuka 2 feels great. The sensitivity is way different than your standard cork or win with a skeleton seat. Its more dispersed throughout the hand and end of the handle not just in the fingers touching the blank. I got two of these and they have a small I.D. so I had to really cut my blanks short in order for them to fit. they both had different I.D. also. They ended up making my 7'6" blanks a 7'3" blank and a 7' 4" blank. that ended up being roughly 9-10" removed just for them to fit and they were tight. Other than that my only issue I had was the hood check area is pretty ugly. Pretty exposed with a large gap. You could build an epoxy ramp to deal with this. But for the price they should offer different size hood checks that you can glue on, and reduce the gap for a cleaner more finished look.
These would be excellent on a small diameter bottom contact type rod.
The blanks used were NFC X-Ray, and Rainshadow RX 10 M/Hs.
I built three rods using the Tsuka 2 baitcast handle . I always build for my personal use before offering to a customer. My impression was favorable from a fishing standpoint from a building point of view I found having to balance the rods required additional weight to the rod as a whole. I pride myself for building the lightest rods that I can. However, after balancing the rods the feel was good. From that I have decided to recommend it to customers that understand weight and balance. I am building one now in combination with a NEPS82MHF. Total length 6’10”. Thanks for the innovation ! Customers felt the grip was a bit slippery. After I fished it myself I felt the same.
Tsuka 2 Carbon Handle for Casting Rods
I really like the handle system minus the smaller diameter I couldn’t use it on the rod I wanted to use it on for the technique I wanted it for.
Feels so nice, light, and durable. Extremely sleek and beautiful aswell.
