CRB Guide Foot Adhesive
Product Details
CRB Guide Foot Adhesive is formulated to make attaching guides to the rod blank much easier prior to wrapping. Simply heat the guide foot, run the guide foot across the stick, and affix to the rod. Not only does this simplify the wrapping process, but it also creates a small barrier between the guide foot and the rod blank eliminating abrasion.
- Easy to Use
- Lasts through MANY rod builds
- Does not interfere with epoxy application
- 1/2" x 4" Stick
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
Customer Reviews
no matter what i did i was unble to get the single foot guides to stick on the blank. even tried wiping down blank with alcohol. I stll had to use masking tape to secure the guide so i could wrap it
Don’t waste your money on this, it’s a stick of hot glue that you can get at a craft store for much cheaper
Sometimes this adhesive works, sometimes it doesn’t. It really depends the shape of the guide foot, diameter of the blank section where the guide goes, and slickness of the blank.
Buff a shiny slick blank just in the guide’s location with a scotch pad or really fine sandpaper, like 600 grit, or worn 400. When it works, it can be helpful. You’ll learn what it takes through your attempts. Be patient with yourself!
This stuff is junk. And will piss you off to the max trying to get a guide to stick to your. Absolute ****
